That sounds like something the utility would make financially unrealistic to do. Are you sure that your state public service commission and consequently the utility would not see that as purely a competitive generator and require all the normal protective relaying necessary for that?
-----Original Message----- From: "Ron Young" <[email protected]> Sent: 9/20/2014 20:50 To: "RE-wrenches" <[email protected]> Subject: [RE-wrenches] wood gasification to grid I have a customer who wants to use a 50kw generator converted to wood gasification to tie into the grid. Any recommendations on the type of grid tie gear that will be appropriate? It’s a preliminary inquiry but I’m guessing a 240v output from the generator, single phase but may be 3ph. I see Solectria and SatCon make inverters in this range. Any suggestions appreciated Ron Young _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
