How high are you wanting to get the conduit (EMT?) off the roof? I have been using Kinetic flashings and rails for mounting PV these days. Great stuff. There is a base that mounts directly onto the shingle and then a flashing goes over it. The base that goes under the flashing has two holes for lags bolts or in your case a couple bolts you can attach to be roof sheeting and then it has a stud for mounting the L-foot (or whatever you want to attach to the stud. You could use a standard 3" L-foot and either use the provided oblong hole or drill your own. If you want to get more height then they also have 4" and 5" L-feet.
http://kineticsolar.com/ benn benn > On Sep 22, 2014, at 3:43 PM, Chris Mason <[email protected]> wrote: > > I'm curious what methods people are using to mount, flash and stand-off > conduit from the comp. shingle roofs. We don't do a lot of shingle, mostly > metal and concrete, so we are less that familiar with the options. We used > SnapNRack flashed mounts for the rail system, but they need a rafter under > them and the conduit run will not be above rafters. > As it is very hot here, I want to get some air between the conduit and the > roof. > > -- > Chris Mason > NABCEP Certified Solar PV Installer™ > Solar Design Engineer > Generac Generators Industrial technician > > www.cometsolar.com > 264.235.5670 > 869.662.5670 > Skype: netconcepts > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
