Bill:
Good luck with that. I think I bought the last set from a fellow wrench years ago. I really miss that gear. You can retrofit the Flexware gear to accommodate SW inverters but it requires cutting metal. We have some photos on our web site, if that is what you are doing. William Gradient Cap_mini Lic 773985 <http://www.millersolar.com/> millersolar.com 805-438-5600 From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bill Haase Sent: Friday, October 24, 2014 3:02 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] ISO Older Outback Quad DC Distribution Panel Friends; Looking for the older Outback (Green) DC Distribution Panel that was commonly used with either 4 Outback Inverters or 2 of the Trace SW Inverters. With or without breakers. Please contact off list. Thank you in advance Bill Haase Haase Energy Systems, Inc. 12561 Wilder Road Red Bluff, CA 96080 530-527-8989 b...@haaseenergy.com
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org