Wrenches,
Does anyone have any best practice recommendations (or books, articles, etc) for integrating a roof mounted PV system with a lightning protection system? Bare #6 copper and a split bolt to the braided copper connecting air terminals? At both ends of the array? Or should we not bond these systems on the roof? Opinions on a 2009 Wrenches thread varied, but I've heard it from a few sources that these should be bonded directly. Wondering if there is a general consensus at this point? Or strong opinions one way or the other? Thanks for your thoughts. Garrison Riegel PV Operations Manager | <http://www.solarserviceinc.com/> Solar Service Inc [p] 847-677-0950 | <mailto:[email protected]> [email protected] NABCEP Certified PV Installation ProfessionalT
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
