Hi All;
My Fluke 36 clamp on DC meter just died again. It will not zero. This
happened before, and I had it repaired, but I think its time for a new
one, as its 15 years old.
What are folks using these days? I'm looking at the Fluke 376; it does
AC/DC current, but also is rated to 1000 v, which makes it useful for
the new higher voltage arrays.
I was also looking at some of the clamp on Power Quality meters, like
the Amprobe ACD-41PQ, or the Extech 382075 Power quality meter. The
Fluke 345 is beyond my budget right now, and doesn't go to 1000 v.
I need the DC current ability now, but adding power factor, and THD
readings would be a serious bonus.
I may just get the Fluke 376, and save my pennies up for the power
quality meter for Christmas....
As always your invaluable input and experiences are greatly appreciated.
--
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
