Using a Atksen Gen wizard will allow the installer to have a; start on low 
starter battery voltage as well as start on low temp feature. If its a propane 
unit I always use the carb heater 1) helps the unit start &20 cycles the unit 
more often in the winter due to the load of the carb heater. OR Why don't you 
set the ex period for a shorter cycle say 3 days? 
On Jul 16, 2015, at 11:03 AM, frenergy wrote:

> Wrenches,
> 
>      We recently discussed the significant load the brains of  many gensets 
> requires, especially in off-grid.  I have been trying to keep the start 
> battery and brains of a Kohler 14KW gen charged with a ~40 PV.  This works 
> fine until the winter.
> 
>      Any issues with keeping that PV connected (with its charge controller) 
> and re-connecting the supplied-by-Kohler power source connection to keep the 
> battery and brains happy?  I would like to think the PV would take some of 
> the load off the AC connection to the main off-grid system, with no conflicts.
> 
> TIA
> 
> Bill
> Feather River Solar Electric 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

> t...@swnl.net               www.SWNL.net
>                 Solarwinds Northernlights       
>        Serving Mid Coast Maine & Northern California
>                          207-832-7574   Cl. 610-517-8401                      
>         
>                               Blair "TUMP" May
>                ********  MAINE'S CHARTER ********
>                       NABCEP    "Certified PV Installer" 
>    
>               ********  MAINE'S CHARTER ********
>                   Trace Xantrex "Certified" Dealer / Installer"
> 


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to