Hi Wrenchers, I have a client that has an aging electric grid with in their group of 32 buildings. The Electric service for this complex all comes into one building which has switch gear that feeds all of the buildings in the complex. The feeders were megger tested with varying results. Some were in such poor condition that the megger test could not be completed. The client has agreed to replace the feeders over time and I am trying to specify a minimum requirement for the quality of the feeders in order for the Solar Inverters to perform as expected. I am looking for a spec that defines a minimum megger reading for feeders or some other way of defining the required quality.
I appreciate any and all thoughts on this. Al Frishman AeonSolar (917) 699-6641 - cell (888) 460-2867 www.aeonsolar.com
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
