Again, conflicting information, as I was told by an SMA trainer that the SI
will run the shifted frequency in the opposite direction to allow electronics
that use the zero crossing to recover, like clocks.
Sincerely,
Glenn Burt
Sent from my 'smart' phone so please excuse grammar and typos.
-----Original Message-----
From: "Steve Jefferson" <[email protected]>
Sent: 8/5/2015 13:05
To: "RE-wrenches" <[email protected]>
Subject: Re: [RE-wrenches] Sunny Island FSPC
The Sunny Island only shifts in the positive direction to limit the Sunny Boys
output.
What components are having issues?
You can contact me offline to discuss.
Thanks
SMA America, LLC
Steve Jefferson
Service Line Supervisor
3925 Atherton Ave
Rocklin, CA 95765 - 3714
U.S.A.
Tel: +1 916 625 3185 (direct)
Fax: +1 916 625 0871
Mobile: +1 916 622 4253
Email: [email protected]<mailto:[email protected]>
www.SMA-America.com<http://www.sma-america.com/>
[cid:[email protected]]<http://www.youtube.com/watch?v=yQWzPuyqhzo&feature=youtu.be>
This email and any attachments thereto may contain SMA America, LLC
confidential, privileged and private material for the sole use of the intended
recipient. Any review, copying, or distribution of this email (or any
attachments thereto) by others is strictly prohibited. If you are not the
intended recipient, please contact the sender immediately and permanently
delete the original and any copies of this email and any attachments thereto.
Thank you.
From: RE-wrenches [mailto:[email protected]] On Behalf
Of Darren Anderson
Sent: Saturday, August 01, 2015 9:45 AM
To: [email protected]
Subject: [RE-wrenches] Sunny Island FSPC
Anyone know if the Sunny Island's Frequency Shift Power Control only shifts the
frequency in the positive direction as indicated in the manual (ex. +1 Hz to 61
Hz for the fAC Start Delta). Or can it also shift the frequency down? I'm
getting 59 Hz output on a remote system and it's screwing with some other
components.
[The entire original message is not included.]
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
