Writing the subject above, it seems like I've heard this question on the wrench list before, but I could not find it in my old email archives. Feel free to pint me back to the old discussion if it's there.
I've been using a flashing based roof attachment for 8+yrs now (quick mount or similar). Now we are looking at Rail-less systems (quick rack is a good example). There is also a non-flashed rail-less racking from roof-tech http://roof-tech.us/ . I've always been of the opinion that simply crushing some sealant/gasket onto an asphalt shingle work fine at first (the test data from roof-tech is impressive), but would be an issue 10+yrs down the road (thermal expansion movement, freeze/thaw, etc). I can make a good waterproof seal at first by just slathering some butyl/silicone to an L-foot and cranking it down on the shingles, but that practice really disappeared 8+yrs ago. Maybe consider this a Poll: (to flash, or not to flash) With Regards, Daniel Young, NABCEP Certified PV Installation ProfessionalTM: Cert #031508-90
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
