A real DIY would be to use masking tape on the top side of the gap then fill from the bottom with a sealant (or I suppose taping the bottom side and fill from the top would work too). It wouldn't have to be completely full as long as it covers fully from side to side and relative thick/deep (half mod frame thickness?) I would use the roof sealant that we use... Henry 925, since it is designed to stay flexible and withstand dynamic movement and good for up to a 1" gap. Then next day remove the tape, unless you use a very high quality tape to begin with. I'm sure there are better ways or at least improvements that can be made this initial suggestion, but it's my day off, sort of ;)
Benn Kilburn SkyFire Energy Inc. 780-906-7807 > On Aug 7, 2015, at 4:00 PM, Wayne Irwin <[email protected]> wrote: > > We have a customer with a ground mount system that would like to seal the 1" > gap (UniRac) between the modules so that he can have a dry space underneath > the array. > > Any product recommendations or DIY suggestions? > > Thanks, > > > Wayne Irwin, > President > License #CVC56695 > State Licensed Solar Contractor > Pure Energy Solar International Inc. > [email protected] > http://PureEnergySolar.com > http://SolarChargingStation.net > 352 377-6527 Office > 352 336-3299 Fax > > > The Sun Is Always Shining! > > The content of this message is Pure Energy Solar Confidential. If you are not > the intended recipient and have received this message in error, any use or > distribution is prohibited. Please notify me immediately by reply e-mail and > delete this message from your computer system. Thank you. > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
