I remember the "early days" of installing, which for us was early 1990's. We
used stainless steel rod hangers straight into rafters, which left us with 4"
threaded rod sticking up out of the roof. We used thru the roof for sealing
under a nut and fender washer. I've visited a couple of those sites recently
(still no leaks after over 25 yrs of production). By the way, we have changed
our mounting methods since then.........
Max Balchowsky
Design Engineer
Golden Bridge Development
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810"Building a Better Future For The Next Generation"
From: jay <[email protected]>
To: RE-wrenches <[email protected]>
Sent: Wednesday, August 26, 2015 7:44 AM
Subject: [RE-wrenches] to flash or not to flash
Didn’t know there was a pole.
I”m on the flash side.
Question for those who don’t.
How would your insurance claim work if you didn’t flash?
jay
peltz power
> On Aug 25, 2015, at 9:59 PM, Jason Andrade <[email protected]>
> wrote:
>
> I wouldn't install a comp roof system without the flashings myself, I am in
> Northern California and the extreme weather both heat and cold are murder on
> roofing.
>
> Jason
>
> West Coast Sustainables
> Jason Andrade
> C-46# 974647
> (530) 410-4745 Cell
> (530) 241-7498 Office
> (530) 348-5301 Fax
> [email protected]
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
