Hey Wrenches! I currently designing a system on a 1560ft long building — standing seam 10º pitch roof, no vents or skylights — with a 10’ setback around all sides for wind loading. There are 10 flush-mounted arrays that are 149 ft x 55 ft — under 150ft directional requirement. After researching both NFPA 1 and 2012 IFC and the array parameters described, I am a little confused. What is the required spacing between arrays? 4, 6, or 8 ft? The 6’ ft option works best in regards to maximizing the roof.
Thanks for the help!! Jason D. Kechijian, LEED AP NABCEP Certified PV Installation Professional™ [email protected] (843) 200-7271
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
