The midnite classic 250 can do this fine. Rectify the generator 110vac to
around 165vdc and feed into classic. Use Aux functions to start and stop
generator based on battery voltage or SOC %.

Roy Rakobitsch
NABCEP Certified Small Wind Installer®
NABCEP Certified Solar PV Installer®
Certified Advanced Tower Climbing, Safety & Rescue
Wind/PV Design Engineer
Windsine LLC
631-514-4166
www.windsine.org
On Oct 15, 2015 6:15 PM, "Chris Daum" <ch...@oasismontana.com> wrote:

> Dear people:
>
> I'm looking for an easy solution for battery charging off a generator, but
> trying to save the cost of a big inverter.  I have a customer who needs to
> charge a 48V battery bank with a 30A charger off of a generator--but I need
> it to sense when the battery voltage is low, so that the "device" (charger)
> will automatically turn on the (2-wire start) generator and charge the
> batteries.  I am trying to avoid the cost of, say, a Magnum 4448PAE with
> its AGS module, and just get a voltage sensitive battery charger.  Is this
> doable?  Any ideas?
>
> THANKS.
>
>
> Chris Daum
> Oasis Montana Inc.
> 406-777-4309
> 406-777-0830 fax
> www.oasismontana.com
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to