Jeremy: I have often wondered this question since the Trace SW days: Since the Radian offers generator support, why not connect the FX inverters to the generator input of the Radian? Program the Radian to expect 30 amps per leg. If the load exceeds 30 amps, the Radian will kick into gen-support mode and aid the FX inverters. If the load is less than 30 amps, the Radian goes to sleep.
William Lic 773985 millersolar.com 805-438-5600 -----Original Message----- From: RE-wrenches [mailto:[email protected]] On Behalf Of Jeremy Rodriguez Sent: Monday, February 01, 2016 7:57 PM To: [email protected] Subject: [RE-wrenches] Increasing output Amps, Off Grid Hello I don't think an OB Radian can be added to an existing stacked pair of FX's. At least easily and have all three inverters work happily with each other. Can it? My client is wanting more output. Even if it's just one leg of 120/240. He is planning to wire a circuit to an outbuilding. 120 v only is fine. He has overloaded the dual 3648 set up once before. I recommended another pair of FX3648 inverters with autoformer. Comments and recommendations appreciated. Thanks in advance Jeremy Rodriguez Solar Installation And Design Expert All Solar, Inc. 1463 M St Penrose Colorado 81240 Sent by Jeremy's iPhone. Sorry for typos and shorthand! _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.htm l List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
