Hi drake. I've been researching problems with using the wrong connectors. Are your home runs using same brand connectors as the modules?
Jay Peltz power. > On Mar 23, 2016, at 2:08 PM, Drake <[email protected]> > wrote: > > Hello Wrenches, > > We have a project with an array on a large metal roof. The AFCI has been > tripping. Investigating the system, there is no evidence of any arcing: the > wiring and connections are all very tight. > > SMA tech support says it is likely that the nuisance tripping comes from > electrical noise getting picked up by the large metal roof. > > What has been your overall experience with nuisance tripping of arc fault > protection? What were the suspected causes? What was the solution? > > Thanks, > > Drake > > Drake Chamberlin > Athens Electric LLC > OH License 44810 > CO License 3773 > NABCEP Certified Solar PV > 740-448-7328 > http://athens-electric.com/ > > > No threats detected. www.avast.com > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
