Hi Jay, I think it just needs to be somewhere in the system. How far is the total wire run? I typically put them near the array because the pole is a convenient mount. The farthest distance I've done was about 800' between the Cu200 and the pump and it worked fine.
On Sat, Apr 9, 2016 at 5:30 PM, Jerry Shafer <[email protected]> wrote: > We have them located close to the array but thats inpart due to the > location, l have several used in tanks not just in the well. > On Apr 9, 2016 10:34 AM, "jay" <[email protected]> wrote: > >> HI All, >> >> Does anyone know where the CU-200 has to be located? >> >> I’m trying to determine if it matters if the CU200 be closer to the pump >> or not? >> >> I have a location where there is some theft possibility so if I can mount >> it 200’ away where the PV is that would help. >> But the manual isn’t any help. >> >> Thanks >> >> jay >> >> Peltz power >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
