Recently, a customer had a metal roof (not standing seam) installed by a
"handyman". Pretty clean installation however for some reason he ran
1X6 stringers across the roof on the 1/2" plywood deck spaced about
every 4 feet (as you go from ridge to eaves). Of course the roofing
screws are at the stringers. I'm sure he had a /great/ reason for doing
so. So now I have been asked to install an array on this roof. You can
feel how "soft" the roof is as you walk on it of course because you are
walking on air-below-metal for most of the roof. Stringer locations
don't jive with possible feet/post locations for rail. I'm usually
pretty good at problem solving but I'm accepting ideas.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org