Hello Wrenches, Deep appreciation for saving me much time and hassle in beta testing products that are released to market prematurely.
Happy to report that the Conext Combox and the Conext Insight portal from Schneider is working very well for me it is a robust remote control, monitoring datalogging solution. Connectivity on sites is varied from satellite, cell modem, and dsl and the system is solid. No issues with it not coming back online. Connections drop regularly and all comes back when the connection is back. Kevin From: RE-wrenches [mailto:[email protected]] On Behalf Of Gary Rochlin Sent: May-16-16 3:25 PM To: 'RE-wrenches' <[email protected]> Subject: Re: [RE-wrenches] Optics RE reliability Yes, by manually disconnecting the power but as mentioned not with the auto reboot with Rev. 15. From: RE-wrenches [mailto:[email protected]] On Behalf Of William Miller Sent: Monday, May 16, 2016 3:06 PM To: 'RE-wrenches' <[email protected]<mailto:[email protected]>> Subject: Re: [RE-wrenches] Optics RE reliability Gary: Are you able to reliably re-establish connectivity by rebooting the Mate3? I was informed today that the power to the Mate3 is on the Orange/White pair. I have the ability to control a relay remotely that could open a relay on these leads. If this will reestablish communications, then this might be a solution. (The device has a ping function wherein you can program it to ping an IP address and perform a prescribed action if the ping fails after a programmable number of attempts over a programmable time period.) Thanks, William From: RE-wrenches [mailto:[email protected]] On Behalf Of Gary Rochlin Sent: Monday, May 16, 2016 2:37 PM To: 'RE-wrenches' <[email protected]<mailto:[email protected]>> Subject: Re: [RE-wrenches] Optics RE reliability We have been having problems with the Mate 3 Optics RE since we installed it at the beginning of 2014. Ours is a battery backup system for a grid tied install. We just got off the phone with Outback this morning after upgrading to Rev. 15 two months ago and we are still having the going offline issue. Currently we have only been able to keep the monitoring running for about half a month and then it needs to be manually rebooted even with the 4-hour reboot function activated. This morning we went out to the site to replace the original Mate 3 and tech support told us we would lose all historic data on the site - We had to pull off again. The only saving grace is the solar system is still working as planned providing power to the back-up system we just can’t see the metrics and this is the last thing we expected from Outback when we made the choice to utilize the Radian system instead of the SMA sunny Island. From what I can tell Outback released their new system without sufficiently beta testing the monitoring and we are all paying for it. Gary Rochlin From: RE-wrenches [mailto:[email protected]] On Behalf Of Chris Mason Sent: Monday, May 16, 2016 1:15 PM To: RE-wrenches <[email protected]<mailto:[email protected]>> Subject: Re: [RE-wrenches] Optics RE reliability We have reported to Outback that the Mate3 OpticsRE will stop reporting if the internet goes down for a while. In the Caribbean, we have some outages and the M3 does not handle them well. I think there is an option to reboot the M3 daily, I would try that. You can be pretty sure it is not a cable failure. On May 16, 2016 4:07 PM, "William Miller" <[email protected]<mailto:[email protected]>> wrote: Friends: We just installed our first Optics RE systems. They are both at the same location connected to a satellite data system. In the three weeks these two systems have been on line, they have become disconnected several times. The latest time both Mates disconnected but we were able to reconnect one by remotely rebooting the router. I have invested a lot of money, time and reputation on these systems. I am hoping reliability improves. I am on a long hold with Outback right now in an attempt to trouble shoot. I am guessing the resolution will be a two hour drive each way to unplug and plug the Cat5 cable in. Ten minutes later: I received helpful information from Outback tech support, as usual. I will be swapping Mates to see if the trouble moves, etc. I will also be setting the auto reboot function. Can anyone else suggest how to resolve these issues? What experience have the remainder of you had with the Optics RE system? Is it reliable for you? Thanks in advance, William Miller _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected]<mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out or update participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org>
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
