Folks,
I'd like to leave the Mate3 at the OB pre-assembled power
center but be able to turn on-off the inverter at a remote location 50
feet away. I assume I can still run some com wire of some kind to a
push switch or toggle? connected to the inverter on-off landing of the
control wiring terminal block in the AC side of the inverter. Will the
Mate3 complain if on-off is done this way?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
