Hi Kris,
Where did you source your DR control boards?
Thanks,
Bill Loesch
Solar 1 - Saint Louis Solar
314 631 1094
On 9/19/2016 5:35 PM, Kristopher Schmid wrote:
Hi Wrenches,
I have a client that has blown out 2 control boards on their oven in
the last few months. The appliance is a Whirlpool Model WFG515S0EW0
powered by a Xantrex DR1512. Since this is an off-grid home, i
recommended that they get an LP stove with no oven glow bar and this
was the unit that the appliance company supplied.
Has anyone seen this before (i am assuming incompatibility of the
circuitry with the modified sine wave output)?
Can you recommend another model that has been tried and true
(preferably Whirlpool)?
Thanks tons,
Kris
--
Shine On!
Kris Schmid
Legacy Solar, LLC
864 Clam Falls Trail
Frederic, WI 54837
www.legacysolar.com <http://www.legacysolar.com>
715-653-4295
NABCEP Certified PV Installer
Licensed Wisconsin Master Electrician
BSEE
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org