Could you use one of those insulated Ilsco terminal blocks (sorry, don't have a part number handy) to transition the #6 to short length of #8/10 then put your #8/10 connector on the short piece?
Benn Kilburn SkyFire Energy Inc. 780-906-7807 > On Oct 6, 2016, at 4:22 PM, Corey Shalanski <co...@joule-energy.com> wrote: > > We're looking for a way to transition from #6 PV wire to #8/#10 PV wire > wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a > #6-compatible MC4 connector. Has anyone else had to deal with this? or has > any creative solutions? > > -- > Corey Shalanski > Joule Energy > New Orleans, LA > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
