Happy New Year Wrenches! Wondering if anyone has had issues with stripping screws for PV (or other...AC/gr) set-screw terminals that are integral to an inverter? In this case specifically, a Fronius IG Plus 11.4-3.
A torque screwdrivers was not used at this point as it happened as the wires were initially being terminated. The ones that did strip, did so with noticeably less (hand torque) pressure than was applied to other terminals in same inverters that snugged up just fine. Benn Kilburn SkyFire Energy Inc. 780-906-7807 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
