I was mixed up thinking someone was saying to replace the "battery temp sensor" instead of the inverter/charger heat sensor.
> HI Dave > > Every one Iâve ever seen is replaceable. > > The sealed units come with a short 1/2â temp sensor, and the vented > units come with a temp sensor mounted to the transformer. > But its the same attachment, small 2 pin polarized connector. > > jay > peltz power > > >> On Apr 30, 2017, at 1:45 PM, Dave Angelini Offgrid Solar >> <[email protected]> wrote: >> >> Often when the fan fails it is caused by the thermistor on the PC board >> that has failed. That is why Outback wanted you to buy the PCB. The >> battery temp sensor is probably fine and you can check it reading the >> temperature of the battery in one of the menus. >> --Dave >> > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail [email protected] text 209 813 0060 _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
