Here Here
Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44
-------- Original Message --------
Subject: Re: [RE-wrenches] OutBack Power MATE3 to MATE3S Upgrade
From: William Miller <[email protected]>
Date: Thu, September 21, 2017 12:52 pm
To: RE-wrenches <[email protected]>
Dan:I have not yet used the 3S. I have installed a number of Mate3s with and without FN-DC units. I have experienced a fair number of glitches and problems with the Mate3 and Optics. I have a list of incidents in a spreadsheet and I am intending to publish them to a web site. It is my general belief that the Outback Mate3 and the Optics system are not as reliable as they should be and were released prematurely. It seems every time they release a new version a new set of problems emerges.Here is but one example that illustrates the frustration: I was encouraged by a top level engineer to use firmware version 003.315.003. Apparently that version was Beta and never released I experienced problems with the display of KW being consumed and was instructed to upgrade to .005. Afterword I noticed the Mate3 was rebooting frequently. Then it was revealed that an auto-reboot function that I had been urged to enable in previous versions never really worked until version .005. I understood the reboot would only occur if the system was locked up but apparently it reboots every 4 hours (or period it is set to) and sends a notification. Why would one want to reboot equipment every 4 hours unless it was locked up? I request a lot of notices from my Optics systems (because it is unreliable) and I don’t need more. Also, it is quite lame, IMHO, to recommend using a function that does not work. Argh!!! (Then I learned that .005 does not solve the incorrect display of kw consumed…Waiting for that to be resolved.)I have been guilty of not reading the release notes. Read them carefully!I will say I have not had any problems interfacing the FN-DC with a Mate3.In spite of the problems with the Optics and Mate3 systems, I am desperately in need of the functionality these systems promise. We have more and more remote sites, more pressure to provide reliable power and better access to broadband internet. The remote reporting and monitoring is essential. I am sticking with Outback for the foreseeable future but I am in constant communications with them to encourage them to fix the many problems. We are all invested in them succeeding.I hope this information is what you were hoping for.William
Lic 773985
millersolar.com
805-438-5600From: RE-wrenches [mailto:[email protected]] On Behalf Of [email protected]
Sent: Thursday, September 21, 2017 9:24 AM
To: [email protected]; RE-wrenches
Subject: Re: [RE-wrenches] OutBack Power MATE3 to MATE3S UpgradeUmm, anyone? anyone?
Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance
List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
