Greetings, Wrenchies~ Below .png image is from page 2-9 from Schneider's Conext-XW-Multi-Unit-Power-System-Design-Guide-975-0739-01-01_Rev-C_ENG.pdf
[image: Inline image 1] Additional details would be welcomed from the group, if available. Specifically, I need to know which xfer switches can react properly based on what the SSR "solid state relay" is doing, and if any compatible xfer switches happen to have "grid only" circuit breaker slots resembling the Generac GenReady panelboard 0054532. A spec for the ratings needed on the SSR would be helpful, as well. The challenge of that SSR physically fitting inside the transfer switch housing in a code compliant matter is another kettle of fish. ++++++++++++++++++++++++++++++++++ I'm also needy today regarding Schneider's "AC-Coupled Smart Charge"; see second .png image: [image: Inline image 2] Mick here: Conext SW is less feature rich compared to Conext XW+ but this implies that XW+ is somehow dumber in how it charges the battery. Can anyone help me understand how "AC-Coupled Dumber Charge" differs from "AC-Coupled Smart Charge"? Thanks in advance for helping me avoid "dumber choices". The Wrench List is the bomb~ Mick Abraham, Proprietor www.abrahamsolar.com Landline: 970-731-4675 Cell phone or for text messaging: 970-946-6584 ᐧ _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org