Wrenches,
I have an upcoming remote residential off grid upgrade job that uses one
of the rare Michigan Energy Works inverter/charger/controller packages,
this one from 1997, which the homeowner wants to continue using. The
package uses a 120 volt nominal array (10 x BP90 in series) and a 144V
nominal battery bank. I'm adding array (6 x 60-cell generic), replacing
batteries (FLA with VRLA), and updating disconnects and overcurrent
protection. Can anyone suggest a user-friendly system monitor that will
work with this system voltage, something akin to a TriMetric 2020 or
2030? I can't think of one that will work with a system voltage this
high. Mostly I'd like the percentage function for a nontechnical homeowner.
Thank you, Allan
--
*Allan Sindelar*
[email protected] <mailto:[email protected]>
NABCEP Certified PV Installation Professional
New Mexico EE98J Journeyman Electrician
Founder (Retired), Positive Energy, Inc.
*505 780-2738 cell*
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
