Check out Quickmount's QBase-Chem-Link standoffs. We've used them on flat rolled comp roofs and they seem to work pretty well. Just make sure you order the right sized diameter.
On Mon, Nov 6, 2017 at 6:25 AM, AE Solar <[email protected]> wrote: > Wrenchers, > We have a residential system that will sit on a small roof section that > has minimal pitch (5 degrees) and has been roofed with rollout asphalt > roofing. Anyone have good products they recommend for flashing attachment > points? Was going to have it re-done with EPDM. Thanks for any thoughts... > Adam > > Adam Katzman > Autonomous Energies > PO Box 1245 > Kingston, NY 12402 > www.autonomousenergies.com > (518) 567-1468 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/[email protected]. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > -- *Lorenzo Ortiz Commercial Design/Support* [email protected]* (530) 274-3671* -- <http://californiasolarco.com/referral-program/> _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
