Hello Wrenchers On the buss bar question. There is the stripped down version of the GSLC. Please see page 7 in the manual (Link Below). http://www.outbackpower.com/downloads/documents/Make_the_Power/radian_gs_load_center/gs_loadcenter_install.pdf
It comes with the pictured items but also included are the positive buss plate and the 2 positive buss bars for the power modules positive dc connections. The part number is simply GSLC Below is a link to the spec sheet. http://www.outbackpower.com/downloads/documents/Make_the_Power/radian_gs_load_center/GSloadcenter_specsheet.pdf I hope this helps Take Care All Lones Tuss Applications Engineer OutBack Power Technologies 17825 59th Ave NE, Suite B, Arlington, WA 98223 360.618.4383 Office | 425.213.8794 Cell www.outbackpower.com -----Original Message----- From: RE-wrenches [mailto:[email protected]] On Behalf Of jay Sent: Wednesday, November 8, 2017 12:44 PM To: RE-wrenches <[email protected]> Subject: [RE-wrenches] outback GSLC parts HI All, Does anyone know if its possible to buy the inverter positive DC bus bars separately? ( its the part that goes from the breakers to the power modules) And if so where? My next GSLC I’m looking to use the most striped down version but if I can’t get the bus bars its hard to mount the main inverter breakers. thanks jay Peltz power _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
