Hi Darryl

It has to do with the zero point crossing. 
With pure sine wave, it crosses almost vertical angle so no time spent there.  
Mod square wave usually has a flat crossing, totally screws certain things up. 

Jay
Peltz power. 

> On Apr 24, 2018, at 8:39 AM, Darryl Thayer <[email protected]> wrote:
> 
> I just spoke with my ev car expert, the onboard charger controls charge by he 
> says PWM there has always been a problem with PWM AC control on modified 
> square wave inverters.  Causing failures when the switching is coincidental.  
> I forgot the exact reason but I have failed equipment using a modified square 
> wave inverter on portable tool charging equipment.    
> 
>> On Mon, Apr 23, 2018 at 1:45 PM, Ray <[email protected]> wrote:
>> Pretty sure the Magnum will work, since I have a customer with a Chevy Volt 
>> running on old Trace SW4024 inverters.  Not mod sine, but they're not near 
>> as clean as the Magnums either.
>> 
>> -Ray
>> 
>> 
>>> On 4/23/18 12:33 PM, RE Ellison wrote:
>>> I have a customer with a 20-year-old modified sine wave inverter that has 
>>> been no issue at all until recently when he arrived from New York City with 
>>> his Chevy bolt
>>> 
>>> Obviously the Bolt will not tolerate the modified sine wave and we’re 
>>> discussing upgrading and we were wondering if the magnum inverter charger 
>>> would work in this situation?
>>> 
>>> Thought that I would check with the knowledge base !
>>> 
>>> Thanks
>>> Bob Ellison
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: [email protected]
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: 
>>> http://www.mail-archive.com/[email protected]/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: [email protected]
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://www.mail-archive.com/[email protected]/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/[email protected]/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to