Nik,

            This sounds like a new install.  Many times I'll suggest to a customer to "see how it goes" with something like this.  It may turn out to be a very occasional event that they are willing to accept, and thus reduce the another failure point factor.  Do you have a snow issue there also?  Its possible the lower edge of the PV frame will slow it down a bit?

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net

On 4/30/2018 5:31 AM, Nik Ponzio, Building Energy wrote:
We have a roofmount PV array that is very close to the run gutter. The customer is concerned that the runoff during heavy rain will overshoot the gutter. So I'm looking for a product that will mount at the lower edge of the array and slow down the rain water. I looked that Alpine SnowGuards but they all have a small gap between top of solar module and bottom of the snow rail.

Any suggestions?


--
Nik Ponzio
Building Energy
1570 South Brownell Road
Williston, VT 05495
802-859-3384 ext.115
http://www.BuildingEnergyVT.com <http://www.BuildingEnergyVT.com>






_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


--



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to