Hey folks,
Outback FP2 with Xfrmr shifts power to "other" leg if that
leg needs more than the one FX can provide, right? Say, you need 5.5 KW
on leg 1, the Xfrmr pulls some power from the leg 2 (inverter) to
support that 5.5KW load on leg 1.
My question (assuming above is accurate) is does the 8048 Radian do the
same?
Thanks,
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org