On Friday, November 2, 2018 12:40pm, "Michael Morningstar" <[email protected]> said: William, When one is doing a lot of bending of rigid conduit, where the finished length of pipe needs to be determined, after all bends are made, and threading happens first due to bends interfering with the threading machine, one develops a DOPE sheet. The term being borrowed from long distance marksmanship, Data On Previous Engagements. One bends scrap pipe to various angles, and by making marks where the bender makes contact with both stub marks, and the 45 degree and saddle marks, a cheat sheet can be developed to help with arriving at desired stub lengths and calculating “shrink”, the amount that a length of pipe shortens after bends are made. Similarly a DOPE sheet can be made, or trigonometry can be used when making concentric bends and segmented bending. That was the world I inhabited for a decade and a half. Now days, if I get into that situation, bend and cut : ) Michael On Nov 2, 2018, at 12:23 PM, Ray <[ [email protected] ]( mailto:[email protected] )> wrote: I usually do the bend and cut method, because it really is faster and EMT is cheap. Look how much time you are already cooking doing research and exploring various apps, etc? I too have wanted to be the cool pro, and bend to exact measurements, but alas, the sun is setting much sooner now, and I need to get the job done. Also, I recently picked up a nifty reamer attachment that chucks up in a cordless drill and finishes the cut end nicely. Between that and my porta band saw, the bend and cut method is faster and the finished job is just as good. Actually I just switched to Metal Clad 6-3 for my PV runs, and it seems better as well. I look forward to hearing what other more accomplished conduit smiths have to offer, though. Ray WaltersRemote Solar303 505-8760 On 11/2/18 12:18 PM, William Miller wrote: Colleagues: I am always trying to improve my conduit bending skills. I came upon this scenario and need some input: I am bending stubs at less than 90 degrees. How do I calculate stub heights at less than 90 degrees? I am using the old bend-it-longer-and-cut-it-to-length method but that does not suit my personal style. I want to make a mark, bend from it and have it fit. I have searched on line and purchased several IOS apps for conduit bending. None of my research has turned up an answer. Thanks in advance for any advice. William <image003.jpg>Lic 773985[ millersolar.com ]( http://www.millersolar.com/ )805-438-5600 _______________________________________________List sponsored by Redwood AllianceList Address: [ [email protected] ]( mailto:[email protected] )Change listserver email address & settings:[ http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org )List-Archive: [ http://www.mail-archive.com/[email protected]/maillist.html ]( http://www.mail-archive.com/[email protected]/maillist.html )List rules & etiquette:[ www.re-wrenches.org/etiquette.htm ]( http://www.re-wrenches.org/etiquette.htm )Check out or update participant bios:[ www.members.re-wrenches.org ]( http://www.members.re-wrenches.org/ )_______________________________________________List sponsored by Redwood AllianceList Address: [ [email protected] ]( mailto:[email protected] )Change listserver email address & settings:[ http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org )List-Archive: [ http://www.mail-archive.com/[email protected]/maillist.html ]( http://www.mail-archive.com/[email protected]/maillist.html )List rules & etiquette:[ www.re-wrenches.org/etiquette.htm ]( http://www.re-wrenches.org/etiquette.htm )Check out or update participant bios:[ www.members.re-wrenches.org ]( http://www.members.re-wrenches.org/ ) Sent from Finest Planet WebMail.
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
