I just discovered that the controller has to be programmed to the proper wired voltage and frequency. I’m having a generator tech check on that. He recently replaced the AVR board I’m now told, but didn’t take any measurements, I guess.
Kirk Herander > On Nov 9, 2018, at 6:27 AM, Evan M <[email protected]> wrote: > > Once upon a time I was certified to work in those things but it's been a > while. Do you have a spare AVR board on hand you can try swapping in to rule > out AVR issues? > > // Evan > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
