Lou, I recently discovered that each layer can be checked for voltage.  I
had one battery test lower than the rest.  Looking at the battery closer, I
found that my meter probe could get the voltage of each layer indivually.
Through an opening in the case. The top layer had the reduced voltage
output and it was one cell of the 4 cells in each layer.  I have 4
customers with Aquions and we are seeing lower storage because the days are
Shorter now and fewer sunny days here in the Northeast. These batteries
really like long slow charges. I have one  customer with 8000 watts of Pv
and a 12kw generator and he can’t figure out why his generator has to run
so long.  It is the nature of the batteries and our darkest month.  His
system is undersized with 12 battery stacks and he is driving to Maine
tomorrow to buy 20 more from another unhappy Aquion user who is going back
to lead acid.  I am hoping doubling his storage will solve another problem
of voltage dropping to 36 volts when his 1.75hp well pump runs when no sun
or generator.  Over sizing the battery bank is ok with Aquions as they
don’t need to be fully charged.on a regular basis.

John Blittersdorf




.


On Sat, Nov 10, 2018 at 5:33 PM Lou Russo <l...@spreesolarsystems.com> wrote:

> Aloha Wrenches,
>
> I have a orphaned system with 6 - Aquion Aspen 48Ss that is running out of
> energy nightly. This is a off-grid system with a Outback FP1. The logs from
> the Mate 3 do not show excess usage. Beyond testing the voltages of the
> individual stacks is there any way to check if a battery is good, bad, or
> failing?  I don't have much experience with Aquions and have yet to have
> any of the 40 or so stacks I have installed fail.
>
> Thanks for your insight.
>
> Aloha,
>
> Lou Russo
> l...@spreesolarsystems.com
> 808 345 6762
> Spree Solar Systems LLC
> CT-34322
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to