What's the error on the controller On Mon, Nov 12, 2018, 00:49 John Blittersdorf <[email protected] wrote:
> Hello Wrenches, > I have a customer with a Generac EcoGen 6kw that starts and runs for > about 30 seconds and then shuts down with high engine temp error. The > engine is stone cold so it must be a temp sensor failure. Disconnecting > the sensor or jumpering the two leads together makes no difference. Has > anyone seen this issue? The engine runs real smooth until it shuts down. > > John Blittersdorf > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
