Is the antenna for the garage door hanging down & free? My in-laws got a new garage door opener installed & it worked sporadically and only when the car was at a certain place in the driveway. The installer had wrapped the antenna around the metal support bracket. I freed it up and the door remote works great now.
Along the same thread: possibly installing a sheet of foil - aluminum bubble or ? insulation above the motor/receiver on the ceiling might shield the radio for the garage door opener. This same product [www.radiantfoil.com] totally blocks all radio reception in our yurt & 3 buildings on our property & all have foil insulation barriers. Let us know if you try this & it works. Dana Orzel Great Solar Works, Inc. C - 208.721.7003 [email protected] Idaho Contractor - # 028765 Idaho PV # 028374 NABCEP # 051112-136 <http://www.solarwork.biz/> www.solarwork.biz "Responsible Technologies for Responsible People since 1988" P Please consider the environment before printing this email. From: RE-wrenches <[email protected]> On Behalf Of Holt Kelly Sent: Tuesday, December 11, 2018 8:06 AM To: [email protected] Subject: [RE-wrenches] Darn Pesky Electrons This is a new one..not critical issue, just very curious. 7.92kW Enphase IQ6 system on garage roof. There seems to be some RFI(?) that is preventing the garage door remote from operating unless it is right at the door. Works ok at night and in cloudy weather, but in full sun it isn't operating as usual before system installed. Small inconvenience but a curious situation. Any thoughts? Holt E. Kelly Holtek Fireplace & Solar Products 500 Jewell Dr. Waco, TX 76712 <http://www.holteksolar.com/> www.holteksolar.com 254-751-9111
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
