Check for bent, mashed over or missing pins between ribbon cables and boards.
-------- Original Message --------
Subject: Re: [RE-wrenches] VFX blinking error codes
From: Ray <r...@solarray.com>
Date: Thu, January 03, 2019 11:00 pm
To: re-wrenches@lists.re-wrenches.org
Not sure, but maybe the fan wire got damaged during the board replacement? The wires are really tight and delicate. I would think when it ran through its start up check and didn't have fan operation it would mess it up.
Ray Walters Remote Solar 303 505-8760On 1/3/19 7:41 PM, br...@willpowerelect.com wrote:
Hi,
Usually very successful with just replacing control and ac boards in older vfx to bring them up to compatibility with Mate 3 or 3s. When testing with 3 nine volt batteries, this one gives error code of ac and error blinking 3 times and batt low on 4th blink. Relay indicator also flashing, and vent fan does not come on. Ribbon cables are both new and well seated. Does anyone know what this code means?
Thanks!
Bruce Fiero-RMI
"Energizing the Rogue Valley"
_______________________________________________ List sponsored by Redwood AllianceList Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org