Kris Stone has worked for OB and is now on his own repairing boards. When I’m in there, replacing the fans is a no brainer. I will usually replace all the boards as most of my installs are off grid. Kris can “swap”/repair the boards IF they are repairable. [email protected] <mailto:[email protected]> 425-233-0731 I do have boards if you need one. T > On Feb 6, 2019, at 11:39 PM, John Blittersdorf <[email protected]> > wrote: > > I have often replaced single boards. Usually the control board but sometimes > the AC board or both. If I remember right, the AC board is common on all, > the control board is different by DC voltage and whether grid tie or off grid > and the FET board is DC voltage specific. Not including European and mobile > units. This is why I have stayed with Outback. Field repairable. About an > hour to take it off the wall, open it up, switch boards, close it up and > reattach to the FlexWare or e-panel. I’ve done dozens over the years. > > John Blittersdorf > > > > Sent from my iPhone > > On Feb 6, 2019, at 10:55 AM, Lones Tuss <[email protected] > <mailto:[email protected]>> wrote: > >> Hello Drake >> Yes replacing a single board in an FX is possible. In the case of a >> lightning strike it may be advisable to replace all three boards as damage >> may not be visible. >> Take Care Sir >> >> From: RE-wrenches <[email protected] >> <mailto:[email protected]>> On Behalf Of >> [email protected] >> <mailto:[email protected]> >> Sent: Tuesday, February 5, 2019 2:52 PM >> To: RE-wrenches <[email protected] >> <mailto:[email protected]>> >> Subject: [RE-wrenches] Outback Boards >> >> ** [EXTERNAL EMAIL] - Please report any suspicious attachments, links, or >> requests for sensitive information to the Help Desk. ** >> Hello Wrenches, >> >> It is my understanding that old Outback VFX inverters can not have only one >> board replaced, but need to have three changed. >> >> We have an inverter that is from around 2005 (serial number VFX 008968). Can >> one board be replaced on this unit? >> >> Thanks, >> >> Drake >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> <mailto:[email protected]> >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> <http://www.mail-archive.com/[email protected]/maillist.html> >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> >> >> Check out or update participant bios: >> www.members.re-wrenches.org <http://www.members.re-wrenches.org/> >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > <mailto:[email protected]> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > <http://www.mail-archive.com/[email protected]/maillist.html> > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > www.members.re-wrenches.org <http://www.members.re-wrenches.org/> > [email protected] > <blocked::mailto:[email protected]%22%20%5Co%20%22blocked::mailto:[email protected]> > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
