Have you looked at the Proteabracket? Jason Szumlanski Principal Solar Designer Florida Solar Design Group
On Thu, Feb 14, 2019, 12:05 PM Sam Haraldson <s...@onsiteenergyinc.com wrote: > Wrenches, > > I have encountered a corrugated metal seam profile that doesn't fit the > standard S-5! Corrubracket we typically employ. I'm looking for alternate > solutions if you will, please. The corrugation pattern is 1-1/4" from > "ridge" top to "ridge" top and the depth of the "valley" is 1/4". A > drawing is attached explaining this further. > > -- > *Sam Haraldson*, Installation Manager > <https://onsiteenergyinc.com/about-us#haraldson> > OnSite Energy, Inc. > NABCEP PV Pro #PV-042217-016714 > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
