Hi Laura,
Is this your CSW? If so you should get on their dealer/installer list and it will make it faster next time. Did you look at if there were warnings also? Is there a combox. If SCP only look at "view device info" under the CSW. It should be se set for advanced settings. Is there still warranty and is it up to date with firmware? The XW line is mature but the CSW has had alot of firmware to get it reliable. I really only use CSW for a spare offgrid. Good Luck! Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail [email protected] [2] text 209 813 0060 On Thu, 28 Feb 2019 16:28:11 -0700, Laura Conchelos wrote: Howdy, I have a Schneider 4048 being used off-grid and it keeps turning off. It shows errors 52-56, all of which are EEPROM ERROR. There is no fault light and the inverter can be turned on again and runs for a couple of hours before it seems to happen again. In the manual it says: "Clear the fault and check the latest configuration made or any recent configurations. If fault detection reoccurs or occurs frequently, service is required." I can't think of anything I configured that would cause this. And Schneider has you fill out a web form rather than answer a phone call apparently. Does anyone have a good tech support number for Schneider? Thanks! Laura -- Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:[email protected]
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
