boB,
This message about the BTS from late January gives me cause to ask a
related question, please: What is the functional relation between the
Outback and Midnite sensors?
Background of my question: Years ago I somehow convinced myself that the
two were interchangeable. I thought that I had heard this from Robin or
yourself, but now I suspect I brainfarted this into my reality. Having
learned that they're not interchangeable I have replaced under my
warranty the five I could identify as having OB sensors with Midnite
sensors. What I'd like to know is the real-world effect of my mistake on
my clients' batteries, especially the two systems that have sealed AGM.
Could you offer a comparison of the two in terms of, say, voltage rise
at 0ºC?
Thank you,
Allan Sindelar
On 1/29/2019 10:03 PM, [email protected] wrote:
Yep. No problem.
It's polarity independent also so if one of the ends of the phone plug
is backwards, it shouldn't matter.
10K Ohms nominal 25 degree C value for the thermistor if anybody cares.
boB
On 1/29/2019 7:29 PM, Jeremy Rodriguez wrote:
Is it ok to extend the battery temp sensor wire for a classic
controller?
Length might be around 25 ft max. Original is 15ft.
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
--
*Allan Sindelar*
[email protected] <mailto:[email protected]>
New Mexico EE98J Journeyman Electrician
Founder (Retired), Positive Energy, Inc.
*505 780-2738 cell*
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
