Friends:
For years we have been supporting large form-factor flooded battery trays by setting them on pressure treat 4X4s. We have developed a cradle we bolt onto a special-order, narrow pallet jack and roll them over the wood supports. It is not a seismic solution, but it works. Just today I have learned that at least one large battery manufacturer is recommending against using any form of wood, apparently due to the potential for rot and/or conductive paths. I am told that the solution is steel racking with plastic covers over the steel. How are the rest of you supporting your large flooded batteries? Thanks in advance, William Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985 Quote of the day: “If there is a job you hate, get really, really good at it. Maybe you will hate it less.“ W. Miller
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
