Bill: I am not sure how your point applies. This occurs on systems that have been running for some time. I would hope equipment in this price range and this application does not need frequent rebooting.
William > On Jun 4, 2019, at 9:32 PM, frenergy <[email protected]> wrote: > > Besides all the good info from Mac, there may be something to gain from > following OB's sequence procedure for a proper complete system (all devices) > shutdown and reboot. > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983 > 530.284.7849 > CA Lic 874049 > www.frenergy.net >> On 6/4/2019 4:04 PM, Bruce Geddes wrote: >> Don’t know about Radian but I had this issue with a dual stack VFXR system. >> After five visits to site (3 hours drive one way) Tech support eventually >> told me there had been a bad batch of comms boards on FXR’s but I had >> already swapped inverters out for VFX’s at last visit and issue ceased. >> Definitely some sort of comms glitch causing the Mate3 to loose info on >> devices. >> Best of luck from down under. >> Bruce Geddes >> PowerOn >> >> From: RE-wrenches [mailto:[email protected]] On >> Behalf Of Mac Lewis >> Sent: Tuesday, 4 June 2019 3:00 p.m. >> To: RE-wrenches >> Subject: Re: [RE-wrenches] Outback inverter firmware mismatch >> >> William, >> >> We have experienced this same issue on various Outback systems, mainly on >> multi-stack fxr systems. I can't say I know or understand why this happens. >> To me, it makes sense that it's a communication error of some kind. What >> I've done with success: >> 1. Update all firmware, Mate, devices etc. >> 2. If a certain device (s) seems to have an issue, replace cables. >> 3. Apply terminal grease to all devices connections and Hub connections. >> >> So far, this approach has worked, but will eat a lot of man hours. >> >> Good luck, and please let us know if you find anything deeper out about this. >> >> >> >> On Mon, Jun 3, 2019, 8:49 PM William Miller <[email protected]> wrote: >> Friends: >> >> As part of my ongoing love/hate relationship with Outback, I have been >> occasionally receiving “Inverter firmware mismatch” warnings on some Radian >> systems. The firmware has not been changed. >> >> I was told it was bad data cables. I replaced all cables on one system only >> to receive more of the same warnings. Then, suddenly the error warnings >> quit. >> >> Now today another system is experiencing the same warnings. >> >> Does anyone know what this means and how to fix it? >> >> Thanks in advance. >> >> William >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> >> Virus-free. www.avast.com >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> > -- > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
