We use either SunPower InvisiMount or IronRidge with the CAMO hidden end clamp. Both need flush cuts to the module. In either case, we lay the last module in place and carefully scribe the cut line flush with the module, lift the module and cut with a Milwaukee bandsaw. If you cut before you place the last module, you can have full access for the cut even with a circular saw.
Bruce Erickson Mendocino Solar Service PO Box 1252 Mendocino, CA 95460 707-937-1701 707-937-1741 fax br...@mendocinosolar.com Connecting Mendocino County to Solar Since 1994 > On Jun 13, 2019, at 6:46 AM, Dana <d...@solarwork.com> wrote: > > We have had happy times with our [3] Milwaukee portable band saws both corded > & battery powered. Happily, cuts; Rail, Unistrut, EMT, PVC, MC, etc. Call me > lazy but there is nothing like a portable band saw on site. > > > > Dana Orzel Great Solar Works, Inc. > C - 208.721.7003 d...@solarwork.com > <mailto:d...@solarwork.com> > Idaho Contractor - # 028765 Idaho PV # 028374 > NABCEP # 051112-136 www.solarwork.com > <http://www.solarwork.com/> > "Responsible Technologies for Responsible People since 1988" > P Please consider the environment before printing this email. > > > From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org > <mailto:re-wrenches-boun...@lists.re-wrenches.org>> On Behalf Of Jerry Shafer > Sent: Wednesday, June 12, 2019 10:40 PM > To: RE-wrenches <re-wrenches@lists.re-wrenches.org > <mailto:re-wrenches@lists.re-wrenches.org>> > Subject: Re: [RE-wrenches] Cutting rail > > Porta band saw works great, Milwaukee has a nice one > Jerry > > On Wed, Jun 12, 2019, 6:32 PM frenergy <frene...@psln.com > <mailto:frene...@psln.com>> wrote: >> Any suggestions for cutting rail with a Sawzall? Many times at the end >> of a run of PVs there could be 5-6" of rail (in this case DPW P8). I >> like to use a circular saw but sometimes I don't have enough clearance >> once the rail and panels are installed. The sawzall works but I'm >> looking for a blade that doesn't load up with aluminum too fast and cuts >> without too much vibration. Other ideas? >> >> Thanks, >> >> Bill >> >> Feather River Solar Electric >> Bill Battagin, Owner >> 4291 Nelson St. >> Taylorsville, CA 95983 >> 530.284.7849 >> CA Lic 874049 >> www.frenergy.net <http://www.frenergy.net/> >> >> >> --- >> This email has been checked for viruses by Avast antivirus software. >> https://www.avast.com/antivirus <https://www.avast.com/antivirus> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> <mailto:RE-wrenches@lists.re-wrenches.org> >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html> >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> <http://www.members.re-wrenches.org/>_______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > <mailto:RE-wrenches@lists.re-wrenches.org> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html> > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org