I have done this and if you dont want y holes use unistrut and have it welded to the roof deck edges and from the channel nuts and up you go Jerry
On Mon, Sep 23, 2019, 6:12 AM Chris Schaefer <ch...@solarandwindfx.com> wrote: > G'Day All, > > I'm looking for anyone with advice that has mounted PV to a > shipping container roof with minimal to no roof penetrations. The container > will not be required to be transported with PV attached, only the racking > and only one time to project site. They will not be mounted flat but prefer > a 35 degree angle. I was thinking of Unirac's ULA series as they use to > have an adjustable leg. I'm not only seeking racking brands but also any, > "if I ever did this again I would..." advice. > > Thanks, > Christopher- > > Chris Schaefer’s > <http:www.solarandwindfx.com> > > *Tel/Fax 585-229-2083 or Cell 585-748-1870 * > *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com > <http://www.solarandwindfx.com> ~ E-mail: ch...@solarandwindfx.com > <ch...@solarandwindfx.com>* > > > Thomas Jefferson, the author of our great Constitution, once said, > "democracy" will cease to exist when you take away from those who are > willing to work and give to those who would not." > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
