I'm trying to decipher why an existing system installed by others has three Comboxes. There are 4 XW+, 9 MPPT80, and an AGS. That sounds like 18 Xanbus devices, so I can't figure out why they used two slaves (one for XWs and AGS and the other for MPPT) and a third combox as master. The master has never aggregated data properly.
I'm thinking of scrapping everything and just using a single Conext Gateway. On Fri, Nov 1, 2019 at 11:19 AM Dave Angelini Offgrid Solar < [email protected]> wrote: > Hi Jason, > > The limitations are basic canbus limits. xanbus is very similar. In very > large clusters, in an XW system comboxes are master slaved to get more > devices. Xanbus devices are also not just one type. In other words an XW+ > is 2 devices and a mppt is one device. Also the overall length of the > wiring is critical as in canbus. Building a large system? Time to read the > tech notes on the Schneider website. What are you trying to design please? > > *Dave Angelini Offgrid Solar > "we go where powerlines don't" > http://members.sti.net/offgridsolar/ <http://members.sti.net/offgridsolar/> > e-mail [email protected] <[email protected]> > text 209 813 0060* > > On Fri, 1 Nov 2019 07:26:59 -0400, Jason Szumlanski < > [email protected]> wrote: > > The Conext Combox manual states: > > Max. number of Xanbus > devices: Up to 20 (depending on the device type) > > Does anyone know what "(depending on the device type)" means? What are the > actual limitations? > > > > Jason Szumlanski > > -- > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
