Good thought, Jay. That may be the case. On Sun, Nov 17, 2019, 9:30 PM Jay <[email protected]> wrote:
> I’m wondering if it’s designed to account for gravity sag once the modules > are mounted. Lots of modules I’ve seen especially the larger format ones > seem to be concave with time. > > If I understand correctly, these are bowed up which would allow them to > settle flat? > > Jay > > > > On Nov 17, 2019, at 2:17 PM, Kristopher Schmid <[email protected]> > wrote: > > > The banding is a good thought, Glenn, except that the one module that was > oriented the opposite way was deformed in the opposite direction. This > rules out the forklift idea, too. I will check specs. I doubt that > testing will reveal anything immediate, but I'm a bit concerned about the > potential long term effects. > > On Sat, Nov 16, 2019, 9:12 AM Kristopher Schmid <[email protected]> > wrote: > >> So, I opened up a pallet of Jinko 400 watt half cell modules yesterday >> and noticed that every module was convex to the glass side. The center was >> 1/4 inch higher than the corners. Has anyone else seen this? Should I be >> concerned? Manufacturing issue? Intentional? >> >> Thanks, >> Kris >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
