Hi Jay; I get that question all the time also. Using 2 Midnite Kids puts you in the same price range as a Classic. If you need UL listed, both Victron and Bluesky have one at the bottom of your capacity range and somewhat in your price range, 50A 100Voc. Non UL, Renogy has one that looks solid. Steca, Phocos and Samlex are all too small on the amp side for you, but are good inexpensive products with support. Once you need 150Voc and more than 50A, everyone jumps up into that $600+ range. Of course there's Amazon and Ebay for non-listed, don't expect accurate ratings, reliability, warranty you can actually use, or any tech support.
Dan Fink Executive Director, Buckville Energy Consulting NABCEP PV Associate NABCEP Certified PV System Inspector IREC Certified Instructor™ for: ~ PV Installation Professional ~ Small Wind Installer NABCEP Registered Continuing Education Providers d <[email protected]>[email protected] 970-672-4342 On Wed, Feb 5, 2020 at 4:04 PM jay <[email protected]> wrote: > HI All, > > I’m wondering if anyone has found a good inexpensive MPPT controller > > 40-80 amp > 100-150v input > > > I keep getting asked about them, and given that many are $100-200 vs > $600-900 for the usual models, its a big difference. > > thanks > jay > > peltz power > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
