Yes that's SnapNRac ground mount rail, now discontinued.
The sliding nuts are compatible with ProSolar, but be aware that SnapNRac midclamps are 1/2" wide vs. ProSolar at 5/8" wide, so you will have to use them in pairs to get the modules to line up.
DonB
Energy Solar
-------- Original Message --------
Subject: RE-wrenches Digest, Vol 13, Issue 122
From: [email protected]
Date: Thu, April 30, 2020 2:41 pm
To: [email protected]

Send RE-wrenches mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org
or, via email, send a message with subject or body 'help' to
[email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific
than "Re: Contents of RE-wrenches digest..."


When responding to posts within the Digest, be sure to restore the Subject: line to the original, and please edit out any extraneous lines from the quoted message.


Today's Topics:

1. Re: Name that Racking (Tump)
2. Re: Rapid Shutdown Compliance (Dave Tedeyan)
3. Re: Rapid Shutdown Compliance (Harry Mahon)


----------------------------------------------------------------------

Message: 1
Date: Thu, 30 Apr 2020 12:20:28 -0400
From: Tump <[email protected]>
To: RE-wrenches <[email protected]>
Subject: Re: [RE-wrenches] Name that Racking
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"

Snap n rac series 200
> On Apr 30, 2020, at 12:17 PM, Dave Tedeyan <[email protected] ><mailto:[email protected]>> wrote:
>
> Hi All,
> Does anyone know what kind of racking is shown in the attached photos?
> I just need to get a few midclamps to add a couple modules, but have not seen it before.
> Thanks!
> -Dave
>
> Dave Tedeyan, PE
> Senior Engineer | Taitem Engineering, PC
>
> 110 South Albany Street | Ithaca, NY 14850
> o. 607.277.1118 x121 f. 607.277.2119
> www.taitem.com <http://www.taitem.com/>
>
> Solar ? Sustainability ? Energy ? Design
> Certified B-Corporation since 2013
> <P1190161 sm.JPG><P1190160 sm.JPG>_______________________________________________
> List sponsored by Redwood Alliance
>

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to