Dana:
For block diagrams: Visio For physical parts and assemblies: Autocad For CAM: Fusion 360. William *From:* RE-wrenches [mailto:[email protected]] *On Behalf Of *Dana Orzel *Sent:* Monday, May 18, 2020 3:30 PM *To:* 'RE-wrenches' *Subject:* [RE-wrenches] Programs for one line DWGs. Hey all you wise guys! I looked back in the archives & found a few recommendations on drawing programs. I had Design CAD-3D for 15 years and it was simple [2D & 3D] & worked fine. I had to upgrade recently as this program is now out of date and am currently overwhelmed with too many overly complex drawing programs. I need to draw boxes, lines, text, arrows, a few curves you know the tasks. I don’t need to do 3D rendering of parts etc. I also need a program that has decent tutorials. What are you all using that is pretty basic for 2D drawings on a very up-to-date PC? Suffering with too many options… Thanks in advance. Dana Orzel Great Solar Works, Inc. *C - 208.721.7003 [email protected] <[email protected]>* Idaho Contractor - # 028765 Idaho PV # 028374 NABCEP # 051112-136 www.solarwork.com *"Responsible Technologies for Responsible People since 1988" * *P* Please consider the environment before printing this email.
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
